Struct async_std::net::SocketAddrV4

1.0.0 · source ·
pub struct SocketAddrV4 { /* private fields */ }
Expand description

An IPv4 socket address.

IPv4 socket addresses consist of an IPv4 address and a 16-bit port number, as stated in IETF RFC 793.

See SocketAddr for a type encompassing both IPv4 and IPv6 socket addresses.

The size of a SocketAddrV4 struct may vary depending on the target operating system. Do not assume that this type has the same memory layout as the underlying system representation.

Examples

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!("127.0.0.1:8080".parse(), Ok(socket));
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));
assert_eq!(socket.port(), 8080);

Implementations§

source§

impl SocketAddrV4

source

pub fn parse_ascii(b: &[u8]) -> Result<SocketAddrV4, AddrParseError>

🔬This is a nightly-only experimental API. (addr_parse_ascii)

Parse an IPv4 socket address from a slice of bytes.

#![feature(addr_parse_ascii)]

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!(SocketAddrV4::parse_ascii(b"127.0.0.1:8080"), Ok(socket));
source§

impl SocketAddrV4

const: 1.69.0 · source

pub const fn new(ip: Ipv4Addr, port: u16) -> SocketAddrV4

Creates a new socket address from an IPv4 address and a port number.

Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
const: 1.69.0 · source

pub const fn ip(&self) -> &Ipv4Addr

Returns the IP address associated with this socket address.

Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));
1.9.0 · source

pub fn set_ip(&mut self, new_ip: Ipv4Addr)

Changes the IP address associated with this socket address.

Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_ip(Ipv4Addr::new(192, 168, 0, 1));
assert_eq!(socket.ip(), &Ipv4Addr::new(192, 168, 0, 1));
const: 1.69.0 · source

pub const fn port(&self) -> u16

Returns the port number associated with this socket address.

Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.port(), 8080);
1.9.0 · source

pub fn set_port(&mut self, new_port: u16)

Changes the port number associated with this socket address.

Examples
use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_port(4242);
assert_eq!(socket.port(), 4242);

Trait Implementations§

source§

impl Clone for SocketAddrV4

source§

fn clone(&self) -> SocketAddrV4

Returns a copy of the value. Read more
source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for SocketAddrV4

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<'de> Deserialize<'de> for SocketAddrV4

source§

fn deserialize<D>( deserializer: D ) -> Result<SocketAddrV4, <D as Deserializer<'de>>::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl Display for SocketAddrV4

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.16.0 · source§

impl From<SocketAddrV4> for SocketAddr

1.5.0 · source§

impl FromStr for SocketAddrV4

§

type Err = AddrParseError

The associated error which can be returned from parsing.
source§

fn from_str(s: &str) -> Result<SocketAddrV4, AddrParseError>

Parses a string s to return a value of this type. Read more
source§

impl Hash for SocketAddrV4

source§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for SocketAddrV4

source§

fn cmp(&self, other: &SocketAddrV4) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for SocketAddrV4

source§

fn eq(&self, other: &SocketAddrV4) -> bool

This method tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for SocketAddrV4

source§

fn partial_cmp(&self, other: &SocketAddrV4) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Serialize for SocketAddrV4

source§

fn serialize<S>( &self, serializer: S ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl ToSocketAddrs for SocketAddrV4

§

type Iter = IntoIter<SocketAddr>

Returned iterator over socket addresses which this type may correspond to.
source§

fn to_socket_addrs(&self) -> Result<IntoIter<SocketAddr>, Error>

Converts this object to an iterator of resolved SocketAddrs. Read more
source§

impl ToSocketAddrs for SocketAddrV4

§

type Iter = IntoIter<SocketAddr>

Returned iterator over socket addresses which this type may correspond to.
source§

fn to_socket_addrs(&self) -> ToSocketAddrsFuture<Self::Iter>

Converts this object to an iterator of resolved SocketAddrs. Read more
source§

impl Copy for SocketAddrV4

source§

impl Eq for SocketAddrV4

source§

impl StructuralEq for SocketAddrV4

source§

impl StructuralPartialEq for SocketAddrV4

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,