pub struct BinaryHeap<T, K, const N: usize> { /* private fields */ }
Expand description

A priority queue implemented with a binary heap.

This can be either a min-heap or a max-heap.

It is a logic error for an item to be modified in such a way that the item’s ordering relative to any other item, as determined by the Ord trait, changes while it is in the heap. This is normally only possible through Cell, RefCell, global state, I/O, or unsafe code.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();

// We can use peek to look at the next item in the heap. In this case,
// there's no items in there yet so we get None.
assert_eq!(heap.peek(), None);

// Let's add some scores...
heap.push(1).unwrap();
heap.push(5).unwrap();
heap.push(2).unwrap();

// Now peek shows the most important item in the heap.
assert_eq!(heap.peek(), Some(&5));

// We can check the length of a heap.
assert_eq!(heap.len(), 3);

// We can iterate over the items in the heap, although they are returned in
// a random order.
for x in &heap {
    println!("{}", x);
}

// If we instead pop these scores, they should come back in order.
assert_eq!(heap.pop(), Some(5));
assert_eq!(heap.pop(), Some(2));
assert_eq!(heap.pop(), Some(1));
assert_eq!(heap.pop(), None);

// We can clear the heap of any remaining items.
heap.clear();

// The heap should now be empty.
assert!(heap.is_empty())

Implementations§

source§

impl<T, K, const N: usize> BinaryHeap<T, K, N>

source

pub const fn new() -> Self

Creates an empty BinaryHeap as a $K-heap.

use heapless::binary_heap::{BinaryHeap, Max};

// allocate the binary heap on the stack
let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(4).unwrap();

// allocate the binary heap in a static variable
static mut HEAP: BinaryHeap<i32, Max, 8> = BinaryHeap::new();
source§

impl<T, K, const N: usize> BinaryHeap<T, K, N>
where T: Ord, K: Kind,

source

pub fn capacity(&self) -> usize

Returns the capacity of the binary heap.

source

pub fn clear(&mut self)

Drops all items from the binary heap.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(1).unwrap();
heap.push(3).unwrap();

assert!(!heap.is_empty());

heap.clear();

assert!(heap.is_empty());
source

pub fn len(&self) -> usize

Returns the length of the binary heap.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(1).unwrap();
heap.push(3).unwrap();

assert_eq!(heap.len(), 2);
source

pub fn is_empty(&self) -> bool

Checks if the binary heap is empty.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();

assert!(heap.is_empty());

heap.push(3).unwrap();
heap.push(5).unwrap();
heap.push(1).unwrap();

assert!(!heap.is_empty());
source

pub fn iter(&self) -> Iter<'_, T>

Returns an iterator visiting all values in the underlying vector, in arbitrary order.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(1).unwrap();
heap.push(2).unwrap();
heap.push(3).unwrap();
heap.push(4).unwrap();

// Print 1, 2, 3, 4 in arbitrary order
for x in heap.iter() {
    println!("{}", x);

}
source

pub fn iter_mut(&mut self) -> IterMut<'_, T>

Returns a mutable iterator visiting all values in the underlying vector, in arbitrary order.

WARNING Mutating the items in the binary heap can leave the heap in an inconsistent state.

source

pub fn peek(&self) -> Option<&T>

Returns the top (greatest if max-heap, smallest if min-heap) item in the binary heap, or None if it is empty.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
assert_eq!(heap.peek(), None);

heap.push(1).unwrap();
heap.push(5).unwrap();
heap.push(2).unwrap();
assert_eq!(heap.peek(), Some(&5));
source

pub fn peek_mut(&mut self) -> Option<PeekMut<'_, T, K, N>>

Returns a mutable reference to the greatest item in the binary heap, or None if it is empty.

Note: If the PeekMut value is leaked, the heap may be in an inconsistent state.

Examples

Basic usage:

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
assert!(heap.peek_mut().is_none());

heap.push(1);
heap.push(5);
heap.push(2);
{
    let mut val = heap.peek_mut().unwrap();
    *val = 0;
}

assert_eq!(heap.peek(), Some(&2));
source

pub fn pop(&mut self) -> Option<T>

Removes the top (greatest if max-heap, smallest if min-heap) item from the binary heap and returns it, or None if it is empty.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(1).unwrap();
heap.push(3).unwrap();

assert_eq!(heap.pop(), Some(3));
assert_eq!(heap.pop(), Some(1));
assert_eq!(heap.pop(), None);
source

pub unsafe fn pop_unchecked(&mut self) -> T

Removes the top (greatest if max-heap, smallest if min-heap) item from the binary heap and returns it, without checking if the binary heap is empty.

source

pub fn push(&mut self, item: T) -> Result<(), T>

Pushes an item onto the binary heap.

use heapless::binary_heap::{BinaryHeap, Max};

let mut heap: BinaryHeap<_, Max, 8> = BinaryHeap::new();
heap.push(3).unwrap();
heap.push(5).unwrap();
heap.push(1).unwrap();

assert_eq!(heap.len(), 3);
assert_eq!(heap.peek(), Some(&5));
source

pub unsafe fn push_unchecked(&mut self, item: T)

Pushes an item onto the binary heap without first checking if it’s full.

source

pub fn into_vec(self) -> Vec<T, N>

Returns the underlying Vec<T,N>. Order is arbitrary and time is O(1).

Trait Implementations§

source§

impl<T, K, const N: usize> Clone for BinaryHeap<T, K, N>
where K: Kind, T: Ord + Clone,

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T, K, const N: usize> Debug for BinaryHeap<T, K, N>
where K: Kind, T: Ord + Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T, K, const N: usize> Default for BinaryHeap<T, K, N>
where T: Ord, K: Kind,

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl<'a, T, K, const N: usize> IntoIterator for &'a BinaryHeap<T, K, N>
where K: Kind, T: Ord,

§

type Item = &'a T

The type of the elements being iterated over.
§

type IntoIter = Iter<'a, T>

Which kind of iterator are we turning this into?
source§

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value. Read more

Auto Trait Implementations§

§

impl<T, K, const N: usize> RefUnwindSafe for BinaryHeap<T, K, N>

§

impl<T, K, const N: usize> Send for BinaryHeap<T, K, N>
where K: Send, T: Send,

§

impl<T, K, const N: usize> Sync for BinaryHeap<T, K, N>
where K: Sync, T: Sync,

§

impl<T, K, const N: usize> Unpin for BinaryHeap<T, K, N>
where K: Unpin, T: Unpin,

§

impl<T, K, const N: usize> UnwindSafe for BinaryHeap<T, K, N>
where K: UnwindSafe, T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.