#[repr(C)]
pub enum PresentMode { AutoVsync = 0, AutoNoVsync = 1, Fifo = 2, FifoRelaxed = 3, Immediate = 4, Mailbox = 5, }
Expand description

Presentation mode for a Window.

The presentation mode specifies when a frame is presented to the window. The Fifo option corresponds to a traditional VSync, where the framerate is capped by the display refresh rate. Both Immediate and Mailbox are low-latency and are not capped by the refresh rate, but may not be available on all platforms. Tearing may be observed with Immediate mode, but will not be observed with Mailbox or Fifo.

AutoVsync or AutoNoVsync will gracefully fallback to Fifo when unavailable.

Immediate or Mailbox will panic if not supported by the platform.

Variants§

§

AutoVsync = 0

Chooses FifoRelaxed -> Fifo based on availability.

Because of the fallback behavior, it is supported everywhere.

§

AutoNoVsync = 1

Chooses Immediate -> Mailbox -> Fifo (on web) based on availability.

Because of the fallback behavior, it is supported everywhere.

§

Fifo = 2

Presentation frames are kept in a First-In-First-Out queue approximately 3 frames long. Every vertical blanking period, the presentation engine will pop a frame off the queue to display. If there is no frame to display, it will present the same frame again until the next vblank.

When a present command is executed on the gpu, the presented image is added on the queue.

No tearing will be observed.

Calls to get_current_texture will block until there is a spot in the queue.

Supported on all platforms.

If you don’t know what mode to choose, choose this mode. This is traditionally called “Vsync On”.

§

FifoRelaxed = 3

Presentation frames are kept in a First-In-First-Out queue approximately 3 frames long. Every vertical blanking period, the presentation engine will pop a frame off the queue to display. If there is no frame to display, it will present the same frame until there is a frame in the queue. The moment there is a frame in the queue, it will immediately pop the frame off the queue.

When a present command is executed on the gpu, the presented image is added on the queue.

Tearing will be observed if frames last more than one vblank as the front buffer.

Calls to get_current_texture will block until there is a spot in the queue.

Supported on AMD on Vulkan.

This is traditionally called “Adaptive Vsync”

§

Immediate = 4

Presentation frames are not queued at all. The moment a present command is executed on the GPU, the presented image is swapped onto the front buffer immediately.

Tearing can be observed.

Supported on most platforms except older DX12 and Wayland.

This is traditionally called “Vsync Off”.

§

Mailbox = 5

Presentation frames are kept in a single-frame queue. Every vertical blanking period, the presentation engine will pop a frame from the queue. If there is no frame to display, it will present the same frame again until the next vblank.

When a present command is executed on the gpu, the frame will be put into the queue. If there was already a frame in the queue, the new frame will replace the old frame on the queue.

No tearing will be observed.

Supported on DX11/12 on Windows 10, NVidia on Vulkan and Wayland on Vulkan.

This is traditionally called “Fast Vsync”

Trait Implementations§

source§

impl Clone for PresentMode

source§

fn clone(&self) -> PresentMode

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for PresentMode

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for PresentMode

source§

fn default() -> PresentMode

Returns the “default value” for a type. Read more
source§

impl Enum for PresentMode
where Self: Any + Send + Sync,

source§

fn field(&self, __name_param: &str) -> Option<&dyn Reflect>

Returns a reference to the value of the field (in the current variant) with the given name. Read more
source§

fn field_at(&self, __index_param: usize) -> Option<&dyn Reflect>

Returns a reference to the value of the field (in the current variant) at the given index.
source§

fn field_mut(&mut self, __name_param: &str) -> Option<&mut dyn Reflect>

Returns a mutable reference to the value of the field (in the current variant) with the given name. Read more
source§

fn field_at_mut(&mut self, __index_param: usize) -> Option<&mut dyn Reflect>

Returns a mutable reference to the value of the field (in the current variant) at the given index.
source§

fn index_of(&self, __name_param: &str) -> Option<usize>

Returns the index of the field (in the current variant) with the given name. Read more
source§

fn name_at(&self, __index_param: usize) -> Option<&str>

Returns the name of the field (in the current variant) with the given index. Read more
source§

fn iter_fields(&self) -> VariantFieldIter<'_>

Returns an iterator over the values of the current variant’s fields.
source§

fn field_len(&self) -> usize

Returns the number of fields in the current variant.
source§

fn variant_name(&self) -> &str

The name of the current variant.
source§

fn variant_index(&self) -> usize

The index of the current variant.
source§

fn variant_type(&self) -> VariantType

The type of the current variant.
source§

fn clone_dynamic(&self) -> DynamicEnum

source§

fn is_variant(&self, variant_type: VariantType) -> bool

Returns true if the current variant’s type matches the given one.
source§

fn variant_path(&self) -> String

Returns the full path to the current variant.
source§

impl FromReflect for PresentMode
where Self: Any + Send + Sync,

source§

fn from_reflect(__param0: &dyn Reflect) -> Option<Self>

Constructs a concrete instance of Self from a reflected value.
source§

fn take_from_reflect( reflect: Box<dyn Reflect> ) -> Result<Self, Box<dyn Reflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails. Read more
source§

impl GetTypeRegistration for PresentMode
where Self: Any + Send + Sync,

source§

impl Hash for PresentMode

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl PartialEq for PresentMode

source§

fn eq(&self, other: &PresentMode) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl Reflect for PresentMode
where Self: Any + Send + Sync,

source§

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value. Read more
source§

fn into_any(self: Box<Self>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.
source§

fn as_any(&self) -> &dyn Any

Returns the value as a &dyn Any.
source§

fn as_any_mut(&mut self) -> &mut dyn Any

Returns the value as a &mut dyn Any.
source§

fn into_reflect(self: Box<Self>) -> Box<dyn Reflect>

Casts this type to a boxed reflected value.
source§

fn as_reflect(&self) -> &dyn Reflect

Casts this type to a reflected value.
source§

fn as_reflect_mut(&mut self) -> &mut dyn Reflect

Casts this type to a mutable reflected value.
source§

fn clone_value(&self) -> Box<dyn Reflect>

Clones the value as a Reflect trait object. Read more
source§

fn set( &mut self, __value_param: Box<dyn Reflect> ) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value. Read more
source§

fn apply(&mut self, __value_param: &dyn Reflect)

Applies a reflected value to this value. Read more
source§

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type. Read more
source§

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type. Read more
source§

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type. Read more
source§

fn reflect_owned(self: Box<Self>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type. Read more
source§

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type). Read more
source§

fn reflect_partial_eq(&self, value: &dyn Reflect) -> Option<bool>

Returns a “partial equality” comparison result. Read more
source§

fn debug(&self, f: &mut Formatter<'_>) -> Result

Debug formatter for the value. Read more
source§

fn serializable(&self) -> Option<Serializable<'_>>

Returns a serializable version of the value. Read more
source§

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type. Read more
source§

impl TypePath for PresentMode
where Self: Any + Send + Sync,

source§

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type. Read more
source§

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type. Read more
source§

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous. Read more
source§

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous. Read more
source§

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous. Read more
source§

impl Typed for PresentMode
where Self: Any + Send + Sync,

source§

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.
source§

impl Copy for PresentMode

source§

impl Eq for PresentMode

source§

impl StructuralEq for PresentMode

source§

impl StructuralPartialEq for PresentMode

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynEq for T
where T: Any + Eq,

source§

fn as_any(&self) -> &(dyn Any + 'static)

Casts the type to dyn Any.
source§

fn dyn_eq(&self, other: &(dyn DynEq + 'static)) -> bool

This method tests for self and other values to be equal. Read more
source§

impl<T> DynHash for T
where T: DynEq + Hash,

source§

fn as_dyn_eq(&self) -> &(dyn DynEq + 'static)

Casts the type to dyn Any.
source§

fn dyn_hash(&self, state: &mut dyn Hasher)

Feeds this value into the given Hasher.
source§

impl<T> DynamicTypePath for T
where T: TypePath,

source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromWorld for T
where T: Default,

source§

fn from_world(_world: &mut World) -> T

Creates Self using data from the given World.
source§

impl<T> GetPath for T
where T: Reflect + ?Sized,

source§

fn reflect_path<'p>( &self, path: impl ReflectPath<'p> ) -> Result<&(dyn Reflect + 'static), ReflectPathError<'p>>

Returns a reference to the value specified by path. Read more
source§

fn reflect_path_mut<'p>( &mut self, path: impl ReflectPath<'p> ) -> Result<&mut (dyn Reflect + 'static), ReflectPathError<'p>>

Returns a mutable reference to the value specified by path. Read more
source§

fn path<'p, T>( &self, path: impl ReflectPath<'p> ) -> Result<&T, ReflectPathError<'p>>
where T: Reflect,

Returns a statically typed reference to the value specified by path. Read more
source§

fn path_mut<'p, T>( &mut self, path: impl ReflectPath<'p> ) -> Result<&mut T, ReflectPathError<'p>>
where T: Reflect,

Returns a statically typed mutable reference to the value specified by path. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> TypeData for T
where T: 'static + Send + Sync + Clone,

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more