pub struct XdgPositioner(/* private fields */);
Expand description

A trivial wrapper for an xdg_positioner::XdgPositioner.

This wrapper calls destroy on the contained positioner when it is dropped.

Implementations§

source§

impl XdgPositioner

source

pub fn new( wm_base: &impl ProvidesBoundGlobal<XdgWmBase, { XdgShell::API_VERSION_MAX }> ) -> Result<Self, GlobalError>

Methods from Deref<Target = XdgPositioner>§

source

pub fn destroy(&self)

destroy the xdg_positioner object

Notify the compositor that the xdg_positioner will no longer be used.

source

pub fn set_size(&self, width: i32, height: i32)

set the size of the to-be positioned rectangle

Set the size of the surface that is to be positioned with the positioner object. The size is in surface-local coordinates and corresponds to the window geometry. See xdg_surface.set_window_geometry.

If a zero or negative size is set the invalid_input error is raised.

source

pub fn set_anchor_rect(&self, x: i32, y: i32, width: i32, height: i32)

set the anchor rectangle within the parent surface

Specify the anchor rectangle within the parent surface that the child surface will be placed relative to. The rectangle is relative to the window geometry as defined by xdg_surface.set_window_geometry of the parent surface.

When the xdg_positioner object is used to position a child surface, the anchor rectangle may not extend outside the window geometry of the positioned child’s parent surface.

If a negative size is set the invalid_input error is raised.

source

pub fn set_anchor(&self, anchor: Anchor)

set anchor rectangle anchor

Defines the anchor point for the anchor rectangle. The specified anchor is used derive an anchor point that the child surface will be positioned relative to. If a corner anchor is set (e.g. ‘top_left’ or ‘bottom_right’), the anchor point will be at the specified corner; otherwise, the derived anchor point will be centered on the specified edge, or in the center of the anchor rectangle if no edge is specified.

source

pub fn set_gravity(&self, gravity: Gravity)

set child surface gravity

Defines in what direction a surface should be positioned, relative to the anchor point of the parent surface. If a corner gravity is specified (e.g. ‘bottom_right’ or ‘top_left’), then the child surface will be placed towards the specified gravity; otherwise, the child surface will be centered over the anchor point on any axis that had no gravity specified. If the gravity is not in the ‘gravity’ enum, an invalid_input error is raised.

source

pub fn set_constraint_adjustment(&self, constraint_adjustment: u32)

set the adjustment to be done when constrained

Specify how the window should be positioned if the originally intended position caused the surface to be constrained, meaning at least partially outside positioning boundaries set by the compositor. The adjustment is set by constructing a bitmask describing the adjustment to be made when the surface is constrained on that axis.

If no bit for one axis is set, the compositor will assume that the child surface should not change its position on that axis when constrained.

If more than one bit for one axis is set, the order of how adjustments are applied is specified in the corresponding adjustment descriptions.

The default adjustment is none.

source

pub fn set_offset(&self, x: i32, y: i32)

set surface position offset

Specify the surface position offset relative to the position of the anchor on the anchor rectangle and the anchor on the surface. For example if the anchor of the anchor rectangle is at (x, y), the surface has the gravity bottom|right, and the offset is (ox, oy), the calculated surface position will be (x + ox, y + oy). The offset position of the surface is the one used for constraint testing. See set_constraint_adjustment.

An example use case is placing a popup menu on top of a user interface element, while aligning the user interface element of the parent surface with some user interface element placed somewhere in the popup surface.

source

pub fn set_reactive(&self)

continuously reconstrain the surface

When set reactive, the surface is reconstrained if the conditions used for constraining changed, e.g. the parent window moved.

If the conditions changed and the popup was reconstrained, an xdg_popup.configure event is sent with updated geometry, followed by an xdg_surface.configure event.

source

pub fn set_parent_size(&self, parent_width: i32, parent_height: i32)

Set the parent window geometry the compositor should use when positioning the popup. The compositor may use this information to determine the future state the popup should be constrained using. If this doesn’t match the dimension of the parent the popup is eventually positioned against, the behavior is undefined.

The arguments are given in the surface-local coordinate space.

source

pub fn set_parent_configure(&self, serial: u32)

set parent configure this is a response to

Set the serial of an xdg_surface.configure event this positioner will be used in response to. The compositor may use this information together with set_parent_size to determine what future state the popup should be constrained using.

Trait Implementations§

source§

impl Debug for XdgPositioner

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Deref for XdgPositioner

§

type Target = XdgPositioner

The resulting type after dereferencing.
source§

fn deref(&self) -> &Self::Target

Dereferences the value.
source§

impl Drop for XdgPositioner

source§

fn drop(&mut self)

Executes the destructor for this type. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more