#[non_exhaustive]
pub enum Event { Configure { width: i32, height: i32, states: Vec<u8>, }, Close, ConfigureBounds { width: i32, height: i32, }, WmCapabilities { capabilities: Vec<u8>, }, }

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

Configure

Fields

§width: i32
§height: i32
§states: Vec<u8>

suggest a surface change

This configure event asks the client to resize its toplevel surface or to change its state. The configured state should not be applied immediately. See xdg_surface.configure for details.

The width and height arguments specify a hint to the window about how its surface should be resized in window geometry coordinates. See set_window_geometry.

If the width or height arguments are zero, it means the client should decide its own window dimension. This may happen when the compositor needs to configure the state of the surface but doesn’t have any information about any previous or expected dimension.

The states listed in the event specify how the width/height arguments should be interpreted, and possibly how it should be drawn.

Clients must send an ack_configure in response to this event. See xdg_surface.configure and xdg_surface.ack_configure for details.

§

Close

surface wants to be closed

The close event is sent by the compositor when the user wants the surface to be closed. This should be equivalent to the user clicking the close button in client-side decorations, if your application has any.

This is only a request that the user intends to close the window. The client may choose to ignore this request, or show a dialog to ask the user to save their data, etc.

§

ConfigureBounds

Fields

§width: i32
§height: i32

recommended window geometry bounds

The configure_bounds event may be sent prior to a xdg_toplevel.configure event to communicate the bounds a window geometry size is recommended to constrain to.

The passed width and height are in surface coordinate space. If width and height are 0, it means bounds is unknown and equivalent to as if no configure_bounds event was ever sent for this surface.

The bounds can for example correspond to the size of a monitor excluding any panels or other shell components, so that a surface isn’t created in a way that it cannot fit.

The bounds may change at any point, and in such a case, a new xdg_toplevel.configure_bounds will be sent, followed by xdg_toplevel.configure and xdg_surface.configure.

Only available since version 4 of the interface

§

WmCapabilities

Fields

§capabilities: Vec<u8>

array of 32-bit capabilities

compositor capabilities

This event advertises the capabilities supported by the compositor. If a capability isn’t supported, clients should hide or disable the UI elements that expose this functionality. For instance, if the compositor doesn’t advertise support for minimized toplevels, a button triggering the set_minimized request should not be displayed.

The compositor will ignore requests it doesn’t support. For instance, a compositor which doesn’t advertise support for minimized will ignore set_minimized requests.

Compositors must send this event once before the first xdg_surface.configure event. When the capabilities change, compositors must send this event again and then send an xdg_surface.configure event.

The configured state should not be applied immediately. See xdg_surface.configure for details.

The capabilities are sent as an array of 32-bit unsigned integers in native endianness.

Only available since version 5 of the interface

Implementations§

source§

impl Event

source

pub fn opcode(&self) -> u16

Get the opcode number of this message

Trait Implementations§

source§

impl Debug for Event

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

§

impl RefUnwindSafe for Event

§

impl Send for Event

§

impl Sync for Event

§

impl Unpin for Event

§

impl UnwindSafe for Event

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.