Struct bevy::app::prelude::App

pub struct App {
    pub world: World,
    pub runner: Box<dyn FnOnce(App) + Send>,
    pub main_schedule_label: Interned<dyn ScheduleLabel>,
    /* private fields */
}

A container of app logic and data.

Bundles together the necessary elements like World and Schedule to create an ECS-based application. It also stores a pointer to a runner function. The runner is responsible for managing the application’s event loop and applying the Schedule to the World to drive application logic.

Examples

Here is a simple “Hello World” Bevy app:

fn main() {
   App::new()
       .add_systems(Update, hello_world_system)
       .run();
}

fn hello_world_system() {
   println!("hello world");
}

Fields

world: World

The main ECS World of the App. This stores and provides access to all the main data of the application. The systems of the App will run using this World. If additional separate World-Schedule pairs are needed, you can use sub_apps.

runner: Box<dyn FnOnce(App) + Send>

The runner function is primarily responsible for managing the application’s event loop and advancing the Schedule. Typically, it is not configured manually, but set by one of Bevy’s built-in plugins. See bevy::winit::WinitPlugin and ScheduleRunnerPlugin.

main_schedule_label: Interned<dyn ScheduleLabel>

The schedule that systems are added to by default.

The schedule that runs the main loop of schedule execution.

This is initially set to Main.

Implementations

impl App

pub fn new() -> App

Creates a new App with some default structure to enable core engine features. This is the preferred constructor for most use cases.

pub fn empty() -> App

Creates a new empty App with minimal default configuration.

This constructor should be used if you wish to provide custom scheduling, exit handling, cleanup, etc.

pub fn update(&mut self)

Advances the execution of the Schedule by one cycle.

This method also updates sub apps. See insert_sub_app for more details.

The schedule run by this method is determined by the main_schedule_label field. By default this is Main.

Panics

The active schedule of the app must be set before this method is called.

pub fn run(&mut self)

Starts the application by calling the app’s runner function.

Finalizes the App configuration. For general usage, see the example on the item level documentation.

run() might not return

Calls to App::run() will never return on iOS and Web.

In simple and headless applications, one can expect that execution will proceed, normally, after calling run() but this is not the case for windowed applications.

Windowed apps are typically driven by an event loop or message loop and some window-manager APIs expect programs to terminate when their primary window is closed and that event loop terminates – behavior of processes that do not is often platform dependent or undocumented.

By default, Bevy uses the winit crate for window creation.

Panics

Panics if called from Plugin::build(), because it would prevent other plugins to properly build.

pub fn plugins_state(&self) -> PluginsState

Check the state of all plugins already added to this app. This is usually called by the event loop, but can be useful for situations where you want to use App::update

pub fn finish(&mut self)

Run Plugin::finish for each plugin. This is usually called by the event loop once all plugins are ready, but can be useful for situations where you want to use App::update.

pub fn cleanup(&mut self)

Run Plugin::cleanup for each plugin. This is usually called by the event loop after App::finish, but can be useful for situations where you want to use App::update.

pub fn init_state<S>(&mut self) -> &mut App

where S: States + FromWorld,

Initializes a State with standard starting values.

If the State already exists, nothing happens.

Adds State<S> and NextState<S> resources, OnEnter and OnExit schedules for each state variant (if they don’t already exist), an instance of apply_state_transition::<S> in StateTransition so that transitions happen before Update and a instance of run_enter_schedule::<S> in StateTransition with a run_once condition to run the on enter schedule of the initial state.

If you would like to control how other systems run based on the current state, you can emulate this behavior using the in_state Condition.

Note that you can also apply state transitions at other points in the schedule by adding the apply_state_transition system manually.

pub fn insert_state<S>(&mut self, state: S) -> &mut App

where S: States,

Inserts a specific State to the current App and overrides any State previously added of the same type.

Adds State<S> and NextState<S> resources, OnEnter and OnExit schedules for each state variant (if they don’t already exist), an instance of apply_state_transition::<S> in StateTransition so that transitions happen before Update and a instance of run_enter_schedule::<S> in StateTransition with a run_once condition to run the on enter schedule of the initial state.

If you would like to control how other systems run based on the current state, you can emulate this behavior using the in_state Condition.

Note that you can also apply state transitions at other points in the schedule by adding the apply_state_transition system manually.

pub fn add_systems<M>( &mut self, schedule: impl ScheduleLabel, systems: impl IntoSystemConfigs<M> ) -> &mut App

Adds a system to the given schedule in this app’s Schedules.

Examples

app.add_systems(Update, (system_a, system_b, system_c));
app.add_systems(Update, (system_a, system_b).run_if(should_run));

pub fn configure_sets( &mut self, schedule: impl ScheduleLabel, sets: impl IntoSystemSetConfigs ) -> &mut App

Configures a collection of system sets in the provided schedule, adding any sets that do not exist.

pub fn add_event<T>(&mut self) -> &mut App

where T: Event,

Setup the application to manage events of type T.

This is done by adding a Resource of type Events::<T>, and inserting an event_update_system into First.

See Events for defining events.

Examples

app.add_event::<MyEvent>();

pub fn insert_resource<R>(&mut self, resource: R) -> &mut App

where R: Resource,

Inserts a Resource to the current App and overwrites any Resource previously added of the same type.

A Resource in Bevy represents globally unique data. Resources must be added to Bevy apps before using them. This happens with insert_resource.

See init_resource for Resources that implement Default or FromWorld.

Examples

#[derive(Resource)]
struct MyCounter {
    counter: usize,
}

App::new()
   .insert_resource(MyCounter { counter: 0 });

pub fn insert_non_send_resource<R>(&mut self, resource: R) -> &mut App

where R: 'static,

Inserts a non-send resource to the app.

You usually want to use insert_resource, but there are some special cases when a resource cannot be sent across threads.

Examples

struct MyCounter {
    counter: usize,
}

App::new()
    .insert_non_send_resource(MyCounter { counter: 0 });

pub fn init_resource<R>(&mut self) -> &mut App

where R: Resource + FromWorld,

Initialize a Resource with standard starting values by adding it to the World.

If the Resource already exists, nothing happens.

The Resource must implement the FromWorld trait. If the Default trait is implemented, the FromWorld trait will use the Default::default method to initialize the Resource.

Examples

#[derive(Resource)]
struct MyCounter {
    counter: usize,
}

impl Default for MyCounter {
    fn default() -> MyCounter {
        MyCounter {
            counter: 100
        }
    }
}

App::new()
    .init_resource::<MyCounter>();

pub fn init_non_send_resource<R>(&mut self) -> &mut App

where R: 'static + FromWorld,

Initialize a non-send Resource with standard starting values by adding it to the World.

The Resource must implement the FromWorld trait. If the Default trait is implemented, the FromWorld trait will use the Default::default method to initialize the Resource.

pub fn set_runner( &mut self, run_fn: impl FnOnce(App) + Send + 'static ) -> &mut App

Sets the function that will be called when the app is run.

The runner function run_fn is called only once by App::run. If the presence of a main loop in the app is desired, it is the responsibility of the runner function to provide it.

The runner function is usually not set manually, but by Bevy integrated plugins (e.g. WinitPlugin).

Examples

fn my_runner(mut app: App) {
    loop {
        println!("In main loop");
        app.update();
    }
}

App::new()
    .set_runner(my_runner);

pub fn is_plugin_added<T>(&self) -> bool

where T: Plugin,

Checks if a Plugin has already been added.

This can be used by plugins to check if a plugin they depend upon has already been added.

pub fn get_added_plugins<T>(&self) -> Vec<&T>

where T: Plugin,

Returns a vector of references to any plugins of type T that have been added.

This can be used to read the settings of any already added plugins. This vector will be length zero if no plugins of that type have been added. If multiple copies of the same plugin are added to the App, they will be listed in insertion order in this vector.

let default_sampler = app.get_added_plugins::<ImagePlugin>()[0].default_sampler;

pub fn add_plugins<M>(&mut self, plugins: impl Plugins<M>) -> &mut App

Adds one or more Plugins.

One of Bevy’s core principles is modularity. All Bevy engine features are implemented as Plugins. This includes internal features like the renderer.

Plugins can be grouped into a set by using a PluginGroup.

There are built-in PluginGroups that provide core engine functionality. The PluginGroups available by default are DefaultPlugins and MinimalPlugins.

To customize the plugins in the group (reorder, disable a plugin, add a new plugin before / after another plugin), call build() on the group, which will convert it to a PluginGroupBuilder.

You can also specify a group of Plugins by using a tuple over Plugins and PluginGroups. See Plugins for more details.

Examples

App::new()
    .add_plugins(MinimalPlugins);
App::new()
    .add_plugins((MinimalPlugins, LogPlugin));

Panics

Panics if one of the plugins was already added to the application.

pub fn register_type<T>(&mut self) -> &mut App

where T: GetTypeRegistration,

Registers the type T in the TypeRegistry resource, adding reflect data as specified in the Reflect derive:

#[derive(Component, Serialize, Deserialize, Reflect)]
#[reflect(Component, Serialize, Deserialize)] // will register ReflectComponent, ReflectSerialize, ReflectDeserialize

See bevy_reflect::TypeRegistry::register.

pub fn register_type_data<T, D>(&mut self) -> &mut App

where T: Reflect + TypePath, D: TypeData + FromType<T>,

Adds the type data D to type T in the TypeRegistry resource.

Most of the time App::register_type can be used instead to register a type you derived Reflect for. However, in cases where you want to add a piece of type data that was not included in the list of #[reflect(...)] type data in the derive, or where the type is generic and cannot register e.g. ReflectSerialize unconditionally without knowing the specific type parameters, this method can be used to insert additional type data.

Example

use bevy_app::App;
use bevy_reflect::{ReflectSerialize, ReflectDeserialize};

App::new()
    .register_type::<Option<String>>()
    .register_type_data::<Option<String>, ReflectSerialize>()
    .register_type_data::<Option<String>, ReflectDeserialize>();

See bevy_reflect::TypeRegistry::register_type_data.

pub fn sub_app_mut(&mut self, label: impl AppLabel) -> &mut App

Retrieves a SubApp stored inside this App.

Panics

Panics if the SubApp doesn’t exist.

pub fn get_sub_app_mut( &mut self, label: impl AppLabel ) -> Result<&mut App, impl AppLabel>

Retrieves a SubApp inside this App with the given label, if it exists. Otherwise returns an Err containing the given label.

pub fn sub_app(&self, label: impl AppLabel) -> &App

Retrieves a SubApp stored inside this App.

Panics

Panics if the SubApp doesn’t exist.

pub fn insert_sub_app(&mut self, label: impl AppLabel, sub_app: SubApp)

Inserts an existing sub app into the app

pub fn remove_sub_app(&mut self, label: impl AppLabel) -> Option<SubApp>

Removes a sub app from the app. Returns None if the label doesn’t exist.

pub fn get_sub_app(&self, label: impl AppLabel) -> Result<&App, impl AppLabel>

Retrieves a SubApp inside this App with the given label, if it exists. Otherwise returns an Err containing the given label.

pub fn add_schedule(&mut self, schedule: Schedule) -> &mut App

Adds a new schedule to the App.

Warning

This method will overwrite any existing schedule with the same label. To avoid this behavior, use the init_schedule method instead.

pub fn init_schedule(&mut self, label: impl ScheduleLabel) -> &mut App

Initializes a new empty schedule to the App under the provided label if it does not exists.

See App::add_schedule to pass in a pre-constructed schedule.

pub fn get_schedule(&self, label: impl ScheduleLabel) -> Option<&Schedule>

Gets read-only access to the Schedule with the provided label if it exists.

pub fn get_schedule_mut( &mut self, label: impl ScheduleLabel ) -> Option<&mut Schedule>

Gets read-write access to a Schedule with the provided label if it exists.

pub fn edit_schedule( &mut self, label: impl ScheduleLabel, f: impl FnOnce(&mut Schedule) ) -> &mut App

Applies the function to the Schedule associated with label.

Note: This will create the schedule if it does not already exist.

pub fn configure_schedules( &mut self, schedule_build_settings: ScheduleBuildSettings ) -> &mut App

Applies the provided ScheduleBuildSettings to all schedules.

pub fn allow_ambiguous_component<T>(&mut self) -> &mut App

where T: Component,

When doing ambiguity checking this ignores systems that are ambiguous on Component T.

This settings only applies to the main world. To apply this to other worlds call the corresponding method on World

Example

#[derive(Component)]
struct A;

// these systems are ambiguous on A
fn system_1(_: Query<&mut A>) {}
fn system_2(_: Query<&A>) {}

let mut app = App::new();
app.configure_schedules(ScheduleBuildSettings {
  ambiguity_detection: LogLevel::Error,
  ..default()
});

app.add_systems(Update, ( system_1, system_2 ));
app.allow_ambiguous_component::<A>();

// running the app does not error.
app.update();

pub fn allow_ambiguous_resource<T>(&mut self) -> &mut App

where T: Resource,

When doing ambiguity checking this ignores systems that are ambiguous on Resource T.

This settings only applies to the main world. To apply this to other worlds call the corresponding method on World

Example

#[derive(Resource)]
struct R;

// these systems are ambiguous on R
fn system_1(_: ResMut<R>) {}
fn system_2(_: Res<R>) {}

let mut app = App::new();
app.configure_schedules(ScheduleBuildSettings {
  ambiguity_detection: LogLevel::Error,
  ..default()
});
app.insert_resource(R);

app.add_systems(Update, ( system_1, system_2 ));
app.allow_ambiguous_resource::<R>();

// running the app does not error.
app.update();

pub fn ignore_ambiguity<M1, M2, S1, S2>( &mut self, schedule: impl ScheduleLabel, a: S1, b: S2 ) -> &mut App

where S1: IntoSystemSet<M1>, S2: IntoSystemSet<M2>,

Suppress warnings and errors that would result from systems in these sets having ambiguities (conflicting access but indeterminate order) with systems in set.

When possible, do this directly in the .add_systems(Update, a.ambiguous_with(b)) call. However, sometimes two independant plugins A and B are reported as ambiguous, which you can only supress as the consumer of both.

Trait Implementations

impl AddAudioSource for App

fn add_audio_source<T>(&mut self) -> &mut App

where T: Decodable + Asset, f32: FromSample<<T as Decodable>::DecoderItem>,

Registers an audio source. The type must implement Decodable, so that it can be converted to a rodio::Source type, and Asset, so that it can be registered as an asset. To use this method on App, the audio and asset plugins must be added first.

impl AddRenderCommand for App

fn add_render_command<P, C>(&mut self) -> &mut App

where P: PhaseItem, C: RenderCommand<P> + Send + Sync + 'static, <C as RenderCommand<P>>::Param: ReadOnlySystemParam,

Adds the RenderCommand for the specified RenderPhase to the app.

impl AppGizmoBuilder for App

fn init_gizmo_group<T>(&mut self) -> &mut App

where T: GizmoConfigGroup + Default,

Registers GizmoConfigGroup T in the app enabling the use of Gizmos<T>.

fn insert_gizmo_group<T>(&mut self, group: T, config: GizmoConfig) -> &mut App

where T: GizmoConfigGroup,

Insert the GizmoConfigGroup in the app with the given value and GizmoConfig.

impl AssetApp for App

fn register_asset_loader<L>(&mut self, loader: L) -> &mut App

where L: AssetLoader,

Registers the given loader in the App’s AssetServer.

fn register_asset_processor<P>(&mut self, processor: P) -> &mut App

where P: Process,

Registers the given processor in the App’s AssetProcessor.

fn register_asset_source( &mut self, id: impl Into<AssetSourceId<'static>>, source: AssetSourceBuilder ) -> &mut App

Registers the given AssetSourceBuilder with the given id.

fn set_default_asset_processor<P>(&mut self, extension: &str) -> &mut App

where P: Process,

Sets the default asset processor for the given extension.

fn init_asset_loader<L>(&mut self) -> &mut App

where L: AssetLoader + FromWorld,

Initializes the given loader in the App’s AssetServer.

fn init_asset<A>(&mut self) -> &mut App

where A: Asset,

Initializes the given Asset in the App by:

fn register_asset_reflect<A>(&mut self) -> &mut App

where A: Asset + Reflect + FromReflect + GetTypeRegistration,

Registers the asset type T using [App::register], and adds ReflectAsset type data to T and ReflectHandle type data to Handle<T> in the type registry.

fn preregister_asset_loader<L>(&mut self, extensions: &[&str]) -> &mut App

where L: AssetLoader,

Preregisters a loader for the given extensions, that will block asset loads until a real loader is registered.

impl Debug for App

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for App

fn default() -> App

Returns the “default value” for a type.

impl RegisterDiagnostic for App

fn register_diagnostic(&mut self, diagnostic: Diagnostic) -> &mut App

Register a new Diagnostic with an App.

Will initialize a DiagnosticsStore if it doesn’t exist.

use bevy_app::App;
use bevy_diagnostic::{Diagnostic, DiagnosticsPlugin, DiagnosticPath, RegisterDiagnostic};

const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");

App::new()
    .register_diagnostic(Diagnostic::new(UNIQUE_DIAG_PATH))
    .add_plugins(DiagnosticsPlugin)
    .run();

impl RenderGraphApp for App

fn add_render_sub_graph(&mut self, sub_graph: impl RenderSubGraph) -> &mut App

fn add_render_graph_node<T>( &mut self, sub_graph: impl RenderSubGraph, node_label: impl RenderLabel ) -> &mut App

where T: Node + FromWorld,

Add a Node to the RenderGraph:

fn add_render_graph_edges<const N: usize>( &mut self, sub_graph: impl RenderSubGraph, edges: impl IntoRenderNodeArray<N> ) -> &mut App

Automatically add the required node edges based on the given ordering

fn add_render_graph_edge( &mut self, sub_graph: impl RenderSubGraph, output_node: impl RenderLabel, input_node: impl RenderLabel ) -> &mut App

Add node edge to the specified graph